P2399
Diesel Intake Air Flow B Position Sensor Circuit High
P2399 is the upper-limit counterpart of P2398: the B-throttle position signal reads higher than any real flap angle can produce. That usually points to a lost sensor ground, a signal wire touching the 5 V reference or battery voltage, or water bridging the terminals in the connector. No manufacturer is known to publish P2399. For the A valve the LML Duramax from GM uses P02E9 once the voltage exceeds 4.72 V during 5 s; Ford's 2023 diesels react when 4.92 V is passed for 3 s. Measure the ground lead back to the module first, since a weak ground lifts the signal without the sensor itself being damaged. The consequences resemble those of the other sensor codes: flap de-energised, MIL, EGR and regeneration compromised.
Possible causes
- Open or high-resistance sensor ground high
- Signal wire shorted to 5 V reference or battery voltage medium
- Moisture bridging terminals in the connector medium
- Failed position sensor low
Symptoms
- MIL on
- Flap stays at spring position
- Regeneration suspended
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2399
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.