OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2397

Diesel Intake Air Flow B Position Sensor Range/Performance

P2397 covers a B-throttle position signal that stays inside its electrical window but does not make sense, for instance a reading that does not move when the motor is driven, or one that disagrees with the commanded angle. CARB asks for such rationality checks on inputs wherever feasible. No published manufacturer table covers P2397. The 6.6 L LML calibration from GM handles the A valve this way under P02E7 and flags a control deviation beyond ±10 % lasting 10 s. Because a sticking flap and a drifting sensor produce the same pattern, compare the scan-tool angle with the real flap position and check the sensor's contact resistance before blaming the actuator. The MIL and reduced EGR control are the main effects; some engines also cut power.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 97

Possible causes

  • Sticking flap that lags behind the command high
  • Worn potentiometer track or drifting sensor medium
  • Contact resistance in connector or signal wire medium
  • Play between gear and flap shaft low

Symptoms

  • MIL on
  • Displayed flap angle does not follow the command
  • Occasionally reduced power

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2397

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication