OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2395

Diesel Intake Air Flow B Control Stuck Closed

P2395 reports a B intake throttle that remains nearer to its closed stop than the module asks for. Of the two stuck faults this is the more serious one, because a flap jammed near its seat starves the engine of air. No manufacturer publishes thresholds for P2395. The GM 2017 diesel check for valve A (P02E5) mirrors the stuck-open test: a positive error above 16 % while the motor is driven at more than 34 % duty towards opening, 1,280 of 1,600 samples, MIL in the first trip. Deposits that lock the flap close to its stop, an iced shaft after cold and damp nights, or a broken return spring are the usual reasons. The engine may smoke, lose power markedly, drop into limp mode or even stall; low-air-flow codes such as P239D often follow.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 95

Possible causes

  • Deposits locking the flap near its closed stop high
  • Broken return spring, flap no longer opens when unpowered medium
  • Jammed gear train or seized shaft bearing medium
  • Ice on the shaft or flap after cold, damp conditions low

Symptoms

  • Marked loss of power, limp mode
  • Black smoke under load
  • Rough running or stalling in severe cases

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2395

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication