P2393
Diesel Intake Air Flow B Control Circuit High
P2393 is the counterpart of P2392: one of the B-throttle motor leads has contact with battery voltage, for example through a pinched harness or a bridged pin in the connector, so the output stage sees an overcurrent as soon as it switches. No manufacturer publishes P2393. For the A valve GM's 2017 diesels flag the analogous P02E3 when more than 9 A flows through the H-bridge in 160 of 200 checks and store it on the second trip. Ford's 2023 diesels need just 0.2 s to recognise the A-valve short. The ECM then disables the driver to protect itself. If P239B is stored as well, a shorted motor winding is a likelier culprit than the harness. Apart from the MIL the driver usually notices nothing; emissions and regeneration suffer.
Possible causes
- Motor lead pinched against a live wire or terminal high
- Bridged pins in the connector (moisture, corrosion) medium
- Shorted turns in the throttle motor medium
- Faulty output stage in the engine control module low
Symptoms
- MIL on
- Filter regeneration not carried out
- Possibly blown fuse or further circuit codes on the same supply
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2393
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.