P2392
Diesel Intake Air Flow B Control Circuit Low
P2392 is set when the module finds the motor output for the B intake throttle pulled towards ground, for example by a chafed wire touching the engine, water inside the connector or a shorted motor. The output stage protects itself and switches off. No manufacturer documents P2392 publicly. Ford's 2023 diesel summary checks the matching A-valve fault (P02E2) continuously while the power stage is active and needs only 0.2 s to register it. Because an H-bridge drives the motor, a ground short on either motor lead can be the trigger; whether the code points to one particular lead depends on the maker. With the motor dead the flap returns to its spring position, open on most designs: driveability changes little, but the EGR rate drops and the module may refuse to regenerate the particulate filter.
Possible causes
- Motor lead chafed through and touching engine or body ground high
- Water or corrosion in the throttle connector medium
- Internal short of the throttle motor to its housing medium
- Damaged H-bridge in the engine control module low
Symptoms
- MIL on, code returns immediately after clearing
- Regeneration blocked or aborted
- Little or no change in driving
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2392
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.