OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2390

Diesel Intake Air Flow B Control Circuit/Open

P2390 concerns the drive circuit of the second electronically operated intake throttle that some diesel engines carry; which flap a maker labels A or B is its own choice. With the driver switched off, the engine module checks whether the motor circuit is closed; an open wire, a pulled connector or a burnt motor winding sets this code. No manufacturer publishes P2390 with thresholds. For the A valve (P02E0) GM's 2017 diesel tables look for a load resistance above 200 kΩ in 160 of 200 checks at 12.5 ms, provided the relay feeds more than 11 V, as a two-trip fault. A dead motor leaves the return spring to hold the flap open on most designs, so the vehicle drives normally while EGR control and regeneration heating lose authority.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 90

Possible causes

  • Connector at the B throttle unplugged, loose or with pushed-back terminals high
  • Broken motor lead in the harness between module and throttle medium
  • Open motor winding inside the throttle unit medium
  • Faulty output stage in the engine control module low

Symptoms

  • MIL on, often without a noticeable change in driving
  • Particulate filter regeneration delayed or blocked
  • Engine may shake more when switched off because the flap no longer closes

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2390

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication