P238F
Water in Fuel Condition - Sensor B
P238F is no wiring fault: it states that water-in-fuel sensor B has detected water, meaning the separator at that point has collected enough to bridge the probe. Ram's 2022 heavy-duty pickups (2500 to 5500) are covered by Stellantis case S2214000004, which keeps it apart from the circuit code P238D: with P238F stored, the filter on the frame has to be emptied completely and the fuel tested for water before any electrical diagnosis. For sensor A the equivalent is P2269, which Ram's 2025–26 Cummins trucks report with the MIL. Water in diesel fuel damages high-pressure pumps and injectors and promotes microbial growth, so drain promptly, find the source (tank, fuel station, condensation) and replace the filter if needed.
Possible causes
- Water collected in the chassis filter separator high
- Fuel contaminated with water from tank or filling station medium
- Separator drained incompletely after an earlier warning medium
Symptoms
- Water-in-fuel lamp or message on
- Rough running or power loss if water reaches the injection system
- MIL on some vehicles
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P238F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.