P238E
Water in Fuel Sensor B Circuit Intermittent
P238E is meant for a water-in-fuel sensor B circuit whose signal flickers or drops out for short periods instead of staying at one fault level. No manufacturer documents P238E publicly. The one published case for the same sensor explains well why such faults come and go: on 2022 Ram heavy-duty trucks Stellantis found water from road spray or pressure washing inside the plug of the frame-mounted filter, logged there as P238D. Moisture that evaporates, terminals that lose contact on rough roads and fuel sloshing over the probe can all produce brief changes. Since the sensor is a plain pair of electrodes, connector, pins and harness clips along the frame rail come first. P238C and P238D are the steady low and high faults.
Possible causes
- Moisture entering and drying out in the connector high
- Loose terminals losing contact on rough roads medium
- Broken harness clips letting the wire rub on the frame low
Symptoms
- Water-in-fuel lamp flickering or coming and going
- Fault not present when tested at the workshop
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P238E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.