P238B
Water in Fuel Sensor B Circuit Range/Performance
P238B means water-in-fuel sensor B delivers a signal that is electrically valid but implausible, for instance a value stuck between the clear dry and wet states, or a self-test answer that arrives at the wrong moment. No manufacturer documents P238B publicly. On 2022 Ram heavy-duty diesels sensor B is fitted to the frame-mounted filter, exposed to road spray (Stellantis case S2214000004). The probe judges conductivity, so a film of dirt, biodiesel deposits or a partly corroded electrode can shift its reading. For the sensor A codes on 2025–26 Ram trucks Stellantis advises draining both filter stages and wiping the probe before replacing anything, a sensible first step here as well. Unlike P238F it does not confirm water.
Possible causes
- Dirt film or deposits on the sensor electrodes high
- Residual water or emulsion around the probe after incomplete draining medium
- Corroded or aged sensor medium
Symptoms
- Water-in-fuel warning without water being found
- Warning that persists after draining
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P238B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.