P2389
EGR Sensor E Circuit Intermittent
P2389 points to an EGR sensor E signal that is mostly plausible but now and then jumps, spikes or drops out. Engine controllers detect this by watching the rate of change between consecutive readings rather than absolute limits. No manufacturer documents P2389 publicly; the nearest published example is GM's sensor D code P2384 on 2025 diesels, which counts readings that change by more than 10 % from one sample to the next and sets a Type A fault after 300 such events in 600 samples. Such faults tend to follow engine vibration, heat cycles or moisture, so connector locks, pin tension and harness routing near hot exhaust parts deserve the first look. A fault that is absent during testing may still return; P2385 to P2387 describe steady faults.
Possible causes
- Weak pin tension or unlatched connector high
- Harness damaged by heat or rubbing near the exhaust medium
- Moisture in the connector medium
- Sensor with an intermittent internal fault low
Symptoms
- MIL on, sometimes going out again
- Fault cannot be reproduced at the workshop
- Jumps visible in the sensor E data stream
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2389
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.