P2388
EGR Sensor E Circuit Range/Performance
P2388 covers an EGR sensor E whose signal is electrically valid but does not agree with what the engine controller expects from the operating state. Typical tests compare the reading with a known condition, such as zero pressure difference with the engine off, or with a modelled value from other sensors. No manufacturer documents P2388 publicly. Published sensor D logic shows the approach: GM's 2025 diesels flag P2383 if the low-pressure EGR differential pressure exceeds 6 % at key-off, while Ford's 2024–2025 petrol engines use P2383 for swapped hoses at the EGR pressure sensor. Plugged or cracked sensing hoses, soot build-up and sensor drift are the usual culprits rather than wiring. The car drives normally, but the EGR monitor cannot complete.
Possible causes
- Sensing hoses blocked, cracked or swapped high
- Soot deposits at the sensor port medium
- Sensor drifted out of calibration medium
Symptoms
- MIL on
- EGR monitor readiness not set
- Sensor E reading implausible at engine off
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2388
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.