P2387
EGR Sensor E Circuit Low
P2387 is stored when the signal of EGR sensor E falls below its valid electrical range. On a pressure sensor with a 5 V reference that typically points to a lost reference feed, a signal wire shorted to ground or a sensor that no longer drives its output; a shorted thermistor would produce the same result on a temperature input. No manufacturer documents P2387 publicly. GM's published limit for the comparable sensor D code P2382 on 2025 diesels is a raw value below 0.02 % of range in 480 of 600 samples, sampled every 6.25 ms after cranking. Because a dead 5 V reference often feeds several sensors at once, other low codes sharing that rail are a useful clue. P2386 covers the high side; EGR usually runs in a fallback mode meanwhile.
Possible causes
- 5 V reference open or pulled down by another sensor high
- Signal wire shorted to ground medium
- Sensor without output signal medium
Symptoms
- MIL on
- Further low-voltage codes on sensors sharing the same reference
- EGR in fallback mode
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2387
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.