OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2385

EGR Sensor E Circuit

P2385 is the general circuit code for a fifth EGR-related sensor, labelled E. The letter is assigned by each manufacturer, so the code only makes sense on engines with an extensive set of EGR sensors, such as diesels that pair high- and low-pressure loops with several pressure and temperature probes. No manufacturer documents P2385 publicly. The closest published logic is for sensor D: Ford's 2024–2025 petrol summary stores P2380 when its smart EGR pressure sensor reports an internal error, and GM's 2025 diesel tables use the D codes for the low-pressure EGR differential pressure sensor. CARB requires circuit checks on every input the EGR monitor depends on. P2386 and P2387 narrow the fault to high or low signal; with any of them stored, EGR diagnosis is suspended or EGR reduced.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 85

Possible causes

  • Connector of EGR sensor E unplugged, damaged or corroded high
  • Open or shorted wire between sensor and engine control unit medium
  • Sensor electrically failed medium
  • Shared 5 V reference supply faulty low

Symptoms

  • MIL on
  • EGR monitor not completing, readiness stays open
  • Possibly higher NOx and slightly changed engine response under load

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2385

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication