P2384
EGR Sensor D Circuit Intermittent
P2384 marks an EGR sensor D signal that jumps or drops out for brief moments without staying at a fixed fault level. GM's 2025 diesel ECM tables apply it to the differential pressure sensor of the low-pressure EGR loop: when two successive raw readings differ by more than 10 % in 300 out of 600 samples, taken every 6.25 ms with the relay supply above 11 V and no high or low circuit fault present, a Type A fault is logged and the MIL comes on in the first trip. GM bulletin 20-NA-039 lists P2384 among several codes on 2020 Silverado and Sierra 1500 trucks with the 3.0L LM2 diesel that a software anomaly could cause, cured by ECM reprogramming. Outside such cases loose terminals and chafed wiring are typical; P2381 to P2383 are the steady faults.
Possible causes
- Loose or corroded terminals at the EGR sensor D connector high
- Harness chafing intermittently on engine or exhaust parts medium
- ECM software anomaly (GM 3.0L LM2 2020, bulletin 20-NA-039) medium
- Sensor with an internal contact fault low
Symptoms
- MIL on, often without noticeable driving change
- Code stored, cleared and returning after some drives
- EGR operation reduced as a precaution
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2384
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.