P2381
EGR Sensor D Circuit High
P2381 means the signal of EGR sensor D is stuck at the top of its electrical range. GM's 2025 diesel ECM tables use it for the differential pressure sensor of the low-pressure EGR loop: if the raw voltage exceeds 99.83 % of the scale in 480 out of 600 samples, taken every 6.25 ms after cranking and with the powertrain relay above 11 V, GM records a Type A fault, lighting the MIL in the first trip. Typical reasons are an open sensor ground or a signal wire touching a 5 V or battery feed. GM bulletin 21-NA-149 for 3.0L LM2 trucks (Silverado, Sierra, Tahoe, Suburban, Yukon, Escalade) lists P2381 among codes that chafed engine harnesses can trigger. P2382 is the opposite limit and P2383 the plausibility check of the same sensor. The low-pressure EGR is usually shut off.
Possible causes
- Open sensor ground or reference return high
- Chafed engine harness shorting the signal to a supply (GM 21-NA-149) medium
- Differential pressure sensor failed with output at full scale medium
Symptoms
- Check engine light on immediately
- Low-pressure EGR disabled, NOx emissions rise
- Other harness-related codes possible at the same time
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2381
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.