P2380
EGR Sensor D Circuit
P2380 is the general circuit code for EGR sensor D. Which sensor carries the letter D is up to the maker. Ford's 2024–2025 petrol OBD summary assigns it to the EGRP sensor, a smart EGR pressure sensor with a digital output covering 0.1 to 408.8 kPa: P2380 is stored when the sensor itself reports an internal malfunction, checked continuously while the EGR monitor runs, with 5 seconds to register the fault; a lost or corrupted data link sets U0669 instead. GM's 2025 diesel tables, by contrast, give its sensor D only the specific codes P2381 to P2384. CARB requires input components used by the EGR monitor to be checked for circuit faults. With the code stored the EGR flow check is not trustworthy and EGR may be cut back; the engine usually runs normally.
Possible causes
- Internal fault reported by the smart EGR pressure sensor high
- Corroded or loose connector at the sensor medium
- Unstable supply or ground to the sensor low
Symptoms
- Check engine light on
- EGR monitor not completed
- Possibly slight knock tendency or higher NOx with EGR reduced
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2380
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.