OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2379

O2 Sensor Out of Range During Deceleration (Bank 2 Sensor 2)

P2379 covers the oxygen sensor behind the catalyst on bank 2 at the moment the injectors are shut off on a closed throttle: the exhaust is then close to fresh air, and a sensor whose reading stays outside the expected lean window is suspect. No manufacturer documents P2379 publicly. The nearest published logic is GM's bank 1 code P232F on the 2023 6.6L L5P, which compares the O2 value of the rear NOx sensor with the front one during overrun (window +3.01 to −3.18 %, Type B); that engine has no second bank. Ford checks the same sensor during fuel cut but reports under P013C, P014A or P2272/P2273. CARB asks at least for a rich-to-lean check of rear sensors in fuel shut-off. Code lists also give P239F this title. The car drives normally; the light points to sensor ageing or an exhaust leak.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 79

Possible causes

  • Bank 2 downstream sensor aged or contaminated, reacting too little to fuel cut high
  • Exhaust leak near the bank 2 rear sensor diluting or distorting the sample medium
  • Chafed sensor lead or corroded connector on the bank 2 rear sensor medium
  • Leaking injector on bank 2 keeping fuel in the exhaust during overrun low

Symptoms

  • Check engine light on
  • No noticeable change in how the car drives
  • Downstream O2 reading on bank 2 stays high during coasting in live data

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2379

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication