P2373
Fuel Volume Regulator B Control Circuit High
P2373 points to too much voltage or current in the control circuit of fuel volume regulator B, typically from a short to battery voltage or a shorted coil. No manufacturer publishes the B version; P0004 on regulator A is the model. Ford's 2023 diesel sets that code when the energised valve draws more than 3.7 A, while 2.2 A is the normal maximum. Deutz's EMR controller lists a short to battery on the high side as P0004-00 and treats critically high output current separately. Ford's gasoline summary explains why ECMs guard this circuit closely: the coil can overheat and fail when battery voltage sits on it permanently. A protecting driver switches off, so regulator B stops metering and rail pressure drifts, often with reduced power.
Possible causes
- Control wire shorted to battery voltage high
- Regulator coil with shorted turns drawing excess current medium
- ECM output stage faulty low
Symptoms
- Check engine light on
- Reduced power or limp-home mode
- Rail pressure deviation codes stored as well
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2373
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.