OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2370

Fuel Volume Regulator B Control Circuit/Open

A fuel volume regulator is the solenoid valve at the high-pressure pump that decides how much of the pump's stroke reaches the rail. Regulator B only exists where a second valve or second pump is fitted – the 5.2 litre V10 of Audi and Lamborghini, for instance, has two cam-driven high-pressure pumps for its two rails. No manufacturer documents P2370 publicly; GM's 2025 diesel table handles a second metering valve under P233A–P233C instead. The A counterparts show the logic: Ford wires its gasoline FVR with both high and low side to the PCM and monitors it continuously, and Ford's 2023 diesel sees an open valve as 2.8–4.8 V at the driver while the valve is off. Without current, delivery from pump B depends on the valve's resting state.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 70

Possible causes

  • Connector at regulator B loose or corroded high
  • Regulator coil burnt open medium
  • Broken high-side or low-side wire medium

Symptoms

  • Check engine light on
  • Rail pressure deviation and possible reduced power
  • Hard starting

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2370

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication