OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P236E

Cylinder 12 Pressure Variation High

P236E means the pressure signal of cylinder 12 scatters more than the ECM tolerates, either within one cycle or from one cycle to the next. No manufacturer publishes the code; the reference is Saab's P039D for cylinder 1, a Type B fault that needs only 0.2 s outside its window. Two groups of causes are possible. Electrical ones make the trace noisy: interference coupled into the signal wire, or a low-reference contact whose resistance changes with vibration. Combustion-related ones make the cylinder really unsteady: an injector whose delivery varies shot by shot, air in the fuel, or a sticking valve. Live data that are noisy even on overrun, when nothing burns, point to the electrical side. Drivers notice slight roughness at most.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 6E

Possible causes

  • Interference on the signal wire medium
  • Low-reference contact with changing resistance medium
  • Injector delivery varying from shot to shot medium
  • Air in the fuel supply low

Symptoms

  • Check engine light on
  • Occasional slight roughness

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P236E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication