OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P236D

Cylinder 12 Pressure Variation Low

P236D is stored when the cylinder 12 pressure trace swings too little – the curve stays flatter than compression and combustion ought to make it. No manufacturer documents this code for a twelve-cylinder engine. In Saab's 9-5 diesel the comparable cylinder-1 code P039C exists in three sub-variants, 00, 01 and 02, a sign that the ECM tells apart several ways in which a signal can be too weak. The likely culprits sit in the sensor: in BorgWarner's design a flexible heater rod passes the pressure on to a measuring diaphragm, so carbon that grips the rod dampens the signal, and ageing circuitry in the head of the plug lowers its amplification. If compression itself were missing, P236B would be the more likely entry. Driving is normally unaffected.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 6D

Possible causes

  • Carbon deposits restricting the heater rod high
  • Sensor electronics with reduced gain medium
  • Actual low compression in cylinder 12 low

Symptoms

  • Check engine light on
  • Flat pressure curve for cylinder 12 in live data

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P236D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication