OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P236B

Cylinder 12 Pressure Too Low

P236B reports that cylinder 12 builds too little combustion pressure while its sensor circuit itself is in order. No manufacturer documents the code, because no V12 or W12 with cylinder pressure measurement has been made public. A weak peak means this cylinder lacks air, fuel or sealing: a valve that does not close fully, a worn ring pack, a head gasket leaking towards a neighbour, or an injector delivering too little. Where cylinders are numbered bank by bank, 12 shares its bank with 7 to 11, so a compression test across that whole bank is worthwhile. A gas leak past the sealing element of the pressure glow plug also lowers the value. Rough idle and the misfire code P0312 often come with it; P236C is the deviation in the other direction.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 6B

Possible causes

  • Intake or exhaust valve of cylinder 12 not sealing medium
  • Worn piston rings or head gasket leak medium
  • Injector delivering too little fuel medium
  • Gas leaking past the glow plug seal low

Symptoms

  • Check engine light on
  • Rough idle and vibration
  • Misfire code for cylinder 12 stored as well

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P236B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication