P2369
Cylinder 12 Pressure Sensor Circuit High
P2369 means the cylinder 12 pressure input reads above its upper limit. Like the rest of the cylinder-12 family, it is not documented publicly by any maker. On Saab's 9-5 diesel the matching cylinder-1 code P0398 is set after more than 2 s above the threshold and is evaluated once per operating cycle. An unplugged sensor drives the value past 10,000 kPa, so to the ECM an open signal or open low-reference wire looks the same as a short to voltage. Saab tells the cases apart with a fused jumper between signal and low reference: the reading should then drop below 50 kPa; if it stays high, the fault lies in the wiring towards the ECM, otherwise in the plug. While the code is active, the ECM has no usable pressure feedback from this cylinder.
Possible causes
- Signal or low-reference wire open high
- Signal shorted to a voltage source medium
- Glow plug sensor electronics outputting a fixed high value low
Symptoms
- Check engine light after the second trip
- Cylinder 12 shows an impossibly high pressure in live data
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2369
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.