P2366
Cylinder 12 Pressure Sensor Circuit
P2366 is the general circuit code for the combustion pressure sensor of cylinder 12; it does not tell whether the signal sits too low or too high. Twelve is the highest number on a V12 or W12. Whether a maker counts bank by bank or along the crankshaft, number 1 is normally the front cylinder, which places 12 at the opposite end of the engine. No twelve-cylinder engine with pressure-sensing glow plugs is publicly documented, so no manufacturer describes P2366; CARB's demand for circuit continuity checks and the cylinder-1 code P0395 frame it. A 2014 Volkswagen bulletin for its 2.0 TDI advises a push-and-pull test of the plug connector before any part is replaced, since a poorly seated connector is often the real culprit. The engine usually runs as before.
Possible causes
- Glow plug connector not fully latched or loose high
- Damaged wire in the harness branch to the rearmost cylinder medium
- Pressure-sensing glow plug faulty medium
Symptoms
- Check engine light on
- Pressure reading for cylinder 12 missing or fixed in live data
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2366
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- static.nhtsa.gov/odi/tsbs/2014/MC-10120324-9999.pdf
- WikipediaFiring order
- saabwisonline.com/9-5-9650/2010/2-engine/engine-management-and-fuel-system-4-cyl-diesel/fault-diagnosis-diagnostic-trouble-codes/dtc-p0397-p0398-p03a1-p03a2-p03ab-p03ac-p03b5-or-p03b6