OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2363

Cylinder 11 Pressure Variation Low

P2363 flags a cylinder 11 pressure signal with too little swing between its low point and the combustion peak. No manufacturer documents this code; cylinder 11 only exists on twelve-cylinder engines, none of which is publicly known with pressure-sensing glow plugs. Saab's 9-5 diesel files the related P039C for cylinder 1 as a Type B signal fault. A flat signal is mostly a sensor matter – the piezo-resistive element has lost sensitivity, or deposits hold the heater rod in place – while a genuine lack of compression in the cylinder is less likely. In Lamborghini's Aventador V12, firing 1-12-4-9-2-11-6-7-3-10-5-8, cylinder 11 is the sixth to fire; the older Lamborghini V12 fired it last. Apart from the warning lamp the driver rarely notices anything.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 63

Possible causes

  • Piezo-resistive sensing element has lost sensitivity high
  • Deposits holding the heater rod in place medium
  • Genuinely low compression in cylinder 11 low

Symptoms

  • Check engine light on
  • Engine runs normally in most cases

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2363

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication