OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2361

Cylinder 11 Pressure Too Low

P2361 says the combustion pressure of cylinder 11 is too low although the sensor works electrically. No manufacturer documents this code, since no twelve-cylinder engine with combustion pressure sensing is publicly described. What the code judges is the cylinder itself: if its peak stays clearly below that of comparable cylinders or below the expected value, combustion or compression is lacking. Candidates are an injector with reduced flow or a clogged nozzle, worn rings or a burnt valve that lowers compression, a leak at the glow plug seat, or a sensor drifting low. A compression or leak-down test separates mechanical faults from injection faults. The engine runs unevenly, particularly at idle, and the cylinder 11 misfire code P0311 may be stored as well.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 61

Possible causes

  • Injector of cylinder 11 with reduced flow or clogged nozzle medium
  • Worn piston rings or burnt valve lowering compression medium
  • Leak at the glow plug seat medium
  • Pressure sensor drifting low low

Symptoms

  • Check engine light on
  • Uneven running, especially at idle
  • Possibly misfire code for cylinder 11 as well

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2361

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication