P235C
Cylinder 11 Pressure Sensor Circuit
P235C stands for a fault in the circuit of the cylinder 11 combustion pressure sensor without saying whether the signal is too low or too high. A V10 ends at cylinder 10, so only twelve-cylinder engines have an eleventh one. With bank-wise numbering, cylinder 11 is the second-to-last of the second bank, between 10 and 12. Production engines combining twelve cylinders with combustion pressure sensors are not on public record, and no manufacturer documents P235C; the description rests on CARB's circuit monitoring rules and the cylinder-1 counterpart P0395. In Saab's 9-5 diesel the ECM wires each such sensor with a 5 V supply, a ground return and a signal line, and a fault in any of the three can trigger the code. Driving is normally unaffected.
Possible causes
- Connector at the cylinder 11 glow plug loose or corroded high
- Reference, low reference or signal wire damaged medium
- Sensor electronics in the glow plug failed medium
Symptoms
- Check engine light on
- No change in how the engine runs
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P235C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.