OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P235B

Cylinder 10 Combustion Performance

P235B rates how well cylinder 10 burns, derived from its pressure curve – for instance from the energy each working cycle releases or from how it compares with the other nine cylinders of a V10. No manufacturer documents this code, nor the cylinder-1 equivalent P039E. CARB supplies the background: diesel passenger cars equipped with combustion or combustion quality sensors must, from model year 2010, flag misfire once it reaches 5 % of firings, counted over 1,000 revolutions – far tighter than the continuous-misfire rule other diesels long had to meet. Coked or worn injectors, partial compression loss, intake air leaks or poor fuel degrade combustion. The engine shakes, smoke and consumption rise, and the code tends to appear together with P2357 or P2358 or with the cylinder 10 misfire code P0310.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 5B

Possible causes

  • Coked or worn injector of cylinder 10 high
  • Partial compression loss in cylinder 10 medium
  • Air leak in the intake tract low
  • Poor or contaminated fuel low

Symptoms

  • Check engine light on
  • Uneven running and vibration
  • Increased smoke and fuel consumption

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P235B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication