OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2359

Cylinder 10 Pressure Variation Low

P2359 means the pressure trace of cylinder 10 changes too little: the build-up through compression and combustion is flatter than the ECM expects. No manufacturer documents this code for cylinder 10. Saab's 9-5 diesel lists the cylinder-1 analogue P039C with three sub-types, 00, 01 and 02, and counts it as a signal performance fault that reacts after 0.2 s out of range; what separates the sub-types is not explained there. BorgWarner's sensor glow plug passes the pressure through a flexible heater rod onto a measuring diaphragm, so a rod jammed by carbon or a stiff diaphragm flattens the curve. A cylinder with hardly any compression looks the same. In a V10 firing 1-6-5-10-2-7-3-8-4-9, as Ford's 6.8 L and Audi's 5.2 do, cylinder 10 is the fourth to fire.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 59

Possible causes

  • Heater rod stuck in carbon, pressure no longer reaches the diaphragm high
  • Sensing element has lost sensitivity medium
  • Cylinder 10 builds up hardly any pressure low

Symptoms

  • Check engine light on
  • Engine behaviour usually unchanged

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2359

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication