P2350
Cylinder 9 Pressure Variation High
P2350 is the opposite of P234F: the cylinder 9 pressure signal swings more than plausible, with peaks or steps that do not fit the engine's operating state. No manufacturer publishes the code for cylinder 9. The analogue in Saab's 9-5 diesel workshop data is P039D, labelled as excessive pressure variation for cylinder 1, set as soon as the signal is outside its window for over 0.2 s and treated as a signal performance fault of Type B. A noisy signal comes mostly from the electrical side – interference on an unshielded or chafed signal wire, poor ground, failing sensor electronics. Less often the combustion itself is uneven, for instance through an injector that dribbles after closing. CARB requires such rationality checks of input sensors. Drivers rarely notice anything beyond the MIL.
Possible causes
- Interference or chafing on the sensor signal wire medium
- Poor sensor ground connection medium
- Sensor electronics in the glow plug failing medium
- Injector of cylinder 9 dribbling after closing low
Symptoms
- Check engine light on
- Usually no noticeable symptoms
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2350
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.