OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2349

Cylinder 9 Pressure Sensor Circuit Range/Performance

P2349 is the plausibility code for the combustion pressure sensor of cylinder 9: the signal is electrically valid but does not match what the ECM expects for the operating point. CARB requires input sensors to be checked for rationality where feasible, in both directions. A natural test point is overrun, when no fuel burns and the peak pressure should match the pure compression pressure; GM's European diesel in the Saab 9-5 already uses that peak to locate top dead centre. No manufacturer publishes this cylinder-9 code; its counterpart for cylinder 1 is P0396. Likely causes are carbon on the sensing element, a leaking glow plug seat or a plug fitted with the wrong torque, which detunes the sensor. The ECM ignores the signal, and the driver hardly notices anything.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 49

Possible causes

  • Sensor drift from combustion deposits high
  • Glow plug seat leaking or plug tightened to wrong torque medium
  • Genuinely low compression in cylinder 9 distorting the comparison low

Symptoms

  • Check engine light on
  • Usually no noticeable driveability change

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2349

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication