OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2347

Cylinder 12 Above Knock/Combustion Vibration Sensor Threshold

P2347 ends the per-cylinder knock series that starts with P2336 for cylinder 1; it is the code for cylinder 12 and thus appears only on V12 engines such as those from BMW, Mercedes-Benz, Ferrari or Lamborghini. The engine module has found that the vibration in cylinder 12's combustion window exceeds the threshold and is holding back that cylinder's spark. The J2012 title speaks of a knock or combustion vibration sensor, so the series is not tied to a particular sensor type. No manufacturer was found that documents P2347 publicly; the only bulletin seen for the series, from Stellantis, covers cylinders 1 to 4 of a four-cylinder engine, and GM and Saab use P0324. Work through fuel, deposits, plug and injector of cylinder 12 and check for mechanical noise.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 47

Possible causes

  • Carbon deposits in cylinder 12 medium
  • Low-octane or contaminated fuel medium
  • Cylinder 12 running lean (restricted injector) low
  • Mechanical noise near the sensor of that bank low

Symptoms

  • Check engine light on
  • Reduced power
  • Possibly knocking under load

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2347

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication