OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2343

Cylinder 8 Above Knock/Combustion Vibration Sensor Threshold

P2343 belongs to cylinder 8, the last cylinder of a V8, and is stored when the knock intensity measured in that cylinder's crank-angle window stays above the calibrated limit. The knock control first answers with spark retard for cylinder 8 alone, and on turbocharged engines it may also lower boost; the code marks that this cylinder keeps knocking. Prolonged detonation can melt or hole a piston or crack the head, so the cause matters more than the light. Typical checks are fuel grade, carbon in cylinder 8, plug type and gap, injector delivery and, if the noise is mechanical, the parts near that bank's sensor. No manufacturer publishes P2343 in openly available documents; GM and Saab cover the same case with P0324 (one cylinder knocking for over 8 s).

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 43

Possible causes

  • Carbon build-up in cylinder 8 medium
  • Fuel grade below the requirement medium
  • Wrong plug type or gap in cylinder 8 low
  • Cylinder 8 running lean from low injector delivery low

Symptoms

  • Check engine light on
  • Pinging or knocking, mostly under load
  • Reduced power, possibly less boost on turbo engines

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2343

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication