OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2342

Cylinder 7 Above Knock/Combustion Vibration Sensor Threshold

P2342 applies only to engines with seven or more cylinders, in practice V8s and larger. It says the vibration picked up by the knock sensor during cylinder 7's combustion window has exceeded the threshold. On a V8 each bank usually has its own sensor, so the module has to combine sensor choice and crank angle to blame the right cylinder; noise from a loose bracket or the valve train in that window can mimic knock. Saab's GM-based tables therefore run a separate abnormal-noise check between 2,000 and 8,500 rpm to spot a sensor that is not properly bolted. No manufacturer was found that publishes P2342; GM and Saab report single-cylinder knock as P0324. If knock is real, cylinder 7 needs a look at deposits, plug, injector and compression before damage occurs.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 42

Possible causes

  • Loose bracket, heat shield or valve train noise in cylinder 7's window medium
  • Deposits or hot spots in cylinder 7 medium
  • Knock sensor of that bank loose or wrongly torqued low
  • Low-octane fuel (usually affects several cylinders) low

Symptoms

  • Check engine light on
  • Possibly audible knocking under load
  • Less power from retarded ignition

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2342

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication