P2339
Cylinder 4 Above Knock/Combustion Vibration Sensor Threshold
P2339 covers cylinder 4. On a four-cylinder engine this is the last cylinder of the series, which is why Stellantis bulletin 09-009-26 lists exactly P2336 to P2339 for the 2.0L turbo PHEV (sales code ECX, Jeep Wrangler 4xe 2024–2025, Grand Cherokee 2023–2025): any of the four codes with the MIL on, often together with a knocking noise, qualifies for an engine replacement under an extended warranty because of machining debris and casting sand. In general the code means the knock control has seen vibration above the limit in the combustion window of cylinder 4 and retards that cylinder's spark. On six- and eight-cylinder engines the series continues with P2340; GM reports such cases as P0324, and Saab uses the sensor codes P0326/P0331 once more than one cylinder knocks.
Possible causes
- Machining debris or casting sand damaging the engine (Stellantis bulletin 09-009-26) medium
- Low-octane fuel or high intake temperature medium
- Deposits raising compression in cylinder 4 medium
Symptoms
- MIL on
- Knocking noise from the engine compartment
- Reduced power
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2339
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.