OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2338

Cylinder 3 Above Knock/Combustion Vibration Sensor Threshold

P2338 sets when the knock signal assigned to cylinder 3 rises above its threshold. Because one or two knock sensors serve several cylinders, the module relies on the crank-angle window to tell which cylinder knocked; a code for just one cylinder therefore suggests something local: carbon build-up, a hot spot, a lean-running injector, a wrong spark plug, or mechanical noise that happens to fall into that window. Low-octane fuel tends to raise knock on every cylinder. Stellantis names P2338 with P2336, P2337 and P2339 in bulletin 09-009-26, which covers the 2.0L PHEV engine in Wrangler 4xe and Grand Cherokee 4xe models from Jeep, where foundry sand and machining chips are the cause and the engine is exchanged. Persistent knock can hole or melt pistons, so it should not be ignored.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 38

Possible causes

  • Carbon build-up or a hot spot in cylinder 3 medium
  • Injector of cylinder 3 delivering too little (lean, hot combustion) medium
  • Engine damage from casting sand or chips (Stellantis 2.0L PHEV) medium
  • Knock sensor loose or wrongly torqued, picking up noise low

Symptoms

  • Check engine light on
  • Pinging under acceleration
  • Noticeably less power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2338

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication