P2336
Cylinder 1 Above Knock/Combustion Vibration Sensor Threshold
The engine module listens to the knock sensors and assigns each vibration burst to the cylinder whose combustion falls into that crank-angle window, so it can retard spark on one cylinder alone. P2336 means the knock intensity attributed to cylinder 1 has exceeded the calibrated threshold. Stellantis lists P2336 to P2339 in bulletin 09-009-26 (May 2026) for the plug-in hybrid 2.0L turbo four (sales code ECX) in the 2024–2025 Jeep Wrangler 4xe and 2023–2025 Grand Cherokee: with the MIL lit and audible knocking, machining debris and casting sand are named as the cause and the whole engine is replaced. GM and Saab file a single knocking cylinder under P0324 instead (more than 8 s). Lasting knock can damage pistons, so the code should be followed up soon.
Possible causes
- Engine damage from machining debris or casting sand (Stellantis 2.0L PHEV, bulletin 09-009-26) medium
- Carbon deposits or hot spots in cylinder 1 medium
- Fuel with too low octane rating medium
- Cylinder 1 running lean (injector delivering too little) low
Symptoms
- Check engine light on
- Knocking or pinging noise from the engine
- Less power because spark is retarded
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2336
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.