OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2333

Ignition Coil L Primary Control Circuit Low

P2333 is the ground-short code for coil L, the twelfth and final coil letter in the SAE scheme. It fits only V12 or W12 engines. There is no public manufacturer documentation for it; the published lists of Ford and GM end at coils J and H. Read by analogy with GM's description of its lower coil codes, the module compares the voltage on the coil L control line with its own limits and records a short to ground after repeated bad samples. CARB's comprehensive component monitoring obliges the system to catch this kind of circuit fault. Note that the letter is a fixed SAE slot, not a cylinder number; a maker may assign coil L to a cylinder other than 12, so the service information of the vehicle decides which coil to inspect. The open-circuit partner is P0362.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 33

Possible causes

  • Coil L shorted internally high
  • Coil L control wire chafed to ground medium
  • Damaged or corroded coil L connector medium
  • Coil L output stage in the engine module failed low

Symptoms

  • Check engine light on
  • One cylinder (usually 12) not firing
  • Mild roughness at idle

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2333

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication