P2332
Ignition Coil K Secondary Circuit
P2332 reserves a code for trouble between coil K and the plug of cylinder 11. No manufacturer documents it publicly: the only published secondary-circuit series, FCA's ion-current codes, covers coils 1 to 8, and twelve-cylinder makers do not release their code lists. Ion-current sensing, known from Saab's Direct Ignition, would be one way to detect such a fault; another is evaluating the secondary voltage. On a V12 with coil-on-plug, the high-voltage path is short – coil tower, boot, plug – so the usual faults are a perforated boot, oil in the plug well or an eroded plug. Whatever the source, CARB still demands cylinder-specific misfire detection, so P0311 is the more likely code to appear. P2330/P2331 cover the primary wiring of the same coil.
Possible causes
- Coil K boot perforated high
- Oil in the plug well of cylinder 11 medium
- Spark plug of cylinder 11 worn out medium
Symptoms
- Check engine light on
- Misfire on cylinder 11 (P0311)
- Faint vibration at idle
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2332
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.