P2331
Ignition Coil K Primary Control Circuit High
P2331 is the short-to-power version for coil K, cylinder 11 in a straightforward count. No manufacturer documents this code publicly; neither Ford nor GM, whose OBD descriptions explain the primary codes in detail, build engines with eleven or more coils. By analogy with Ford's description of P2301 to P2328, the driver would register current or voltage above the short-circuit limit while switched, and many systems then disable the injector of that cylinder to keep raw fuel out of the catalysts – Ford does this for 30 s at a time. On a V12 the loss of one cylinder is subtle, so the warning light may be the first sign. Look for a coil lead rubbing against a supply wire and for a coil with internal leakage; the low-side partner is P2330.
Possible causes
- Coil K signal wire shorted to a supply wire high
- Coil K with internal leakage medium
- Engine module output for coil K defective low
Symptoms
- Check engine light on
- Cylinder 11 may be fuel-cut temporarily
- Slightly uneven idle
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2331
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.