P2328
Ignition Coil J Primary Control Circuit High
P2328 marks the end of Ford's published coil list: it is the last entry in the driver short-circuit-high group of the 2012 and 2020–2023 OBD summaries, and the 2014 Ford code list puts it directly before the evaporative codes with a MIL flag. It tells you the switching wire of coil J, the tenth coil, carries voltage where the driver expects a path to ground, or that the coil draws a current outside the allowed window. The protective logic is the same as for the other Ford coils – fuel to that cylinder is withdrawn for 30 s and restored – while internal module faults of the coil driver IC are reported separately as P06D1. Use a wiring diagram for the V10 to find where the coil J lead runs next to battery feeds.
Possible causes
- Coil J control wire shorted to battery voltage high
- Coil J drawing abnormal current medium
- PCM output for coil J damaged low
Symptoms
- Check engine light on
- Cylinder 10 switched off at intervals
- Engine runs rough and pulls weakly
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2328
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.