P2326
Ignition Coil I Secondary Circuit
P2326 would report a fault in the high-voltage output of coil I – coil, boot or plug of the ninth cylinder. No manufacturer documents this code publicly. FCA's ion-sensing secondary codes, the closest analogue, end at coil 8 (P2323), and Ford, the one maker with public coil I codes, monitors that coil only on its driver side (P2324/P2325). A system that set P2326 would have to judge spark quality on the plug, for example via ion current as in Saab's Direct Ignition, or via secondary voltage. In practice, a weak spark on a ten- or twelve-cylinder engine shows up through misfire detection, which CARB's OBD II rules require for every cylinder: expect P0309. Check plug, boot and coil on cylinder 9 first if the code ever appears.
Possible causes
- Spark plug on cylinder 9 worn or bridged high
- Coil I boot perforated or oil-soaked medium
- Coil I secondary winding weak medium
Symptoms
- Check engine light on
- Misfire on cylinder 9 (P0309)
- Hesitation under heavy load
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2326
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.