P2324
Ignition Coil I Primary Control Circuit Low
Coil I is the ninth coil, so P2324 only appears on ten- or twelve-cylinder petrol engines. The documented user is Ford: its OBD system summaries (2012 and 2020–2023) group P2324 with the other codes for a coil driver shorted to ground, monitored continuously from 200 rpm with the battery between 11 and 16 V, and Ford's 2014 code interpretation list marks it as a MIL code. The candidate engine in Ford's range is the 6.8-litre Modular V10 of the E-Series and heavy trucks, for which Ford also specifies a 40-1 crank wheel. After a driver fault the PCM shuts the injector of that cylinder for 30 s and retries. GM's tables end at coil H, so no GM engine uses this code. Opens on coil I are P0359, misfire on cylinder 9 is P0309.
Possible causes
- Coil I (cylinder 9) shorted internally high
- Coil I control wire grounded on the engine or exhaust side medium
- Moisture or corroded pins at the coil I plug medium
- PCM coil driver for cylinder 9 failed low
Symptoms
- Check engine light on
- Cylinder 9 cuts out, rough running
- Reduced towing or climbing power
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2324
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.