OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2320

Ignition Coil G Secondary Circuit

P2320 points at the high-voltage half of coil G, normally the coil on cylinder 7, so only engines with seven or more cylinders can log it. FCA is the maker on record: STAR case S2118000002 from March 2021 for the 2020–2021 Ram 1500 names P2320 as coil 7 secondary circuit with insufficient ionization. Insufficient ionization means the PCM saw too little ion current across the plug gap after the spark, a sign of weak or missing combustion in that cylinder. FCA's first step is a pull-push-pull check of the coil connector to see whether it is fully seated and locked, followed by normal diagnosis if the code returns. A shorted control wire on the same coil instead sets P2318/P2319, an open one P0357. Expect a rough-running engine and often P0307 alongside.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 20

Possible causes

  • Coil 7 connector not fully seated or latched (FCA) high
  • Spark plug of cylinder 7 worn, fouled or with wrong gap medium
  • Coil G secondary winding or boot breaking down medium
  • Ion-current evaluation in the PCM faulty low

Symptoms

  • Check engine light on
  • Misfire felt on cylinder 7, often with P0307
  • Engine shakes at idle or under load

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2320

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication