OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P231E

Cylinder 11 Air-Fuel Ratio Imbalance - Adjustment At Limit During Balance

P231E belongs to cylinder 11 and can only come from twelve-cylinder engines, V12 or W12. The per-cylinder fuel trim for cylinder 11 sits at its limit during balancing. There is no public manufacturer description and no NHTSA bulletin. On such engines six cylinders share each bank, so one deviating cylinder shifts the bank sensor signal only slightly; that is one reason CARB accepts a bank or misfire code where a single cylinder cannot be resolved. Mercedes' M177 bulletin for the cylinder 7 code of the same series shows that a software update can be the real remedy. In the workshop, compare the trim values and misfire counts of cylinder 11 (P0311, P21A6) with its neighbours before the injector is replaced.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 1E

Possible causes

  • Injector of cylinder 11 delivering too much or too little (deposits, wear) high
  • Air leak at the intake port or injector seal of cylinder 11 medium
  • Valve of cylinder 11 not sealing (worn seat or guide), low compression medium
  • Poor contact at the connector of injector 11 low

Symptoms

  • Check engine light on
  • Rough idle, possibly misfire on cylinder 11
  • Higher fuel consumption or exhaust smell

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P231E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication