OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P231C

Cylinder 9 Air-Fuel Ratio Imbalance - Adjustment At Limit During Balance

P231C points to cylinder 9 and therefore exists only on ten- and twelve-cylinder engines, a small group of mostly high-performance and heavy-duty petrol units. The balancing logic has pushed the fuel trim for cylinder 9 to its limit. No manufacturer documents the code publicly and the NHTSA index has no bulletin for it. With five or six cylinders per bank, singling out one cylinder through the oxygen sensor is harder than on a four, so such engines lean on crankshaft speed analysis or active tests. Mercedes calls the underlying function injector quantity adjustment for cylinder balancing, and its M177 bulletin shows the series in use on large engines. CARB lets a maker store a bank code when a cylinder cannot be resolved. Check injector 9, intake sealing and compression, and compare P0309 and P21A4.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 1C

Possible causes

  • Injector of cylinder 9 delivering too much or too little (deposits, wear) high
  • Air leak at the intake port or injector seal of cylinder 9 medium
  • Valve of cylinder 9 not sealing (worn seat or guide), low compression medium
  • Poor contact at the connector of injector 9 low

Symptoms

  • Check engine light on
  • Rough idle, possibly misfire on cylinder 9
  • Higher fuel consumption or exhaust smell

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P231C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication