OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P231B

Cylinder 8 Air-Fuel Ratio Imbalance - Adjustment At Limit During Balance

P231B is the balance-limit code for cylinder 8, the last cylinder of a V8 and an inner one on V10 and V12 engines. The fuel trim for that cylinder has hit its stop while balancing. No maker documents P231B publicly; the nearest evidence is Mercedes' bulletin for the AMG M177 V8 in the SL, which shows that this engine uses the cylinder 7 to 12 range and treats it partly as a software issue, together with CARB's rule that the stored code should locate the cause as precisely as the method allows. On a V8, cylinder 8 shares a bank with three others, so cross-check the bank code P219A or P219B, the misfire counter P0308 and the imbalance code P21A3. Injector 8, the intake gasket and compression come next.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 1B

Possible causes

  • Injector of cylinder 8 delivering too much or too little (deposits, wear) high
  • Air leak at the intake port or injector seal of cylinder 8 medium
  • Valve of cylinder 8 not sealing (worn seat or guide), low compression medium
  • Poor contact at the connector of injector 8 low

Symptoms

  • Check engine light on
  • Rough idle, possibly misfire on cylinder 8
  • Higher fuel consumption or exhaust smell

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P231B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication