P2316
Ignition Coil F Primary Control Circuit High
P2316 means the coil F control line, cylinder 6, sits at a voltage it should not have while the module switches it – a short to supply or a fault inside the coil. In VW's 2014 Touareg tables the high threshold is a signal voltage above about 5.1–7.0 V. GM's 2019 table for the supercharged LT5 V8 in the Corvette checks the line with the driver switched on, accepts it only if no path below 100 ohms to supply exists, and rates the result Type B: 50 failed checks in 63 and two trips before the MIL comes on. Saab's 9-5 2.8 V6 sets P2316 after 4 s or 30 s in total within 400–5,000 rpm, and notes that the ignition coil could also log misfire P0300 or P0306. If the fault is intermittent, wiggling the harness while watching the cylinder 6 misfire counter helps find it.
Possible causes
- Coil F control wire shorted to a supply line high
- Internal short in coil F medium
- Intermittent contact in the harness near coil F medium
- Engine module driver defective low
Symptoms
- Check engine light on
- Misfire on cylinder 6, P0306 may also be stored
- Intermittent stumbling
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2316
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- static.nhtsa.gov/odi/tsbs/2014/MC-10074008-2280.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2019/19OBDG03A Diagnostics.pdf
- saabwisonline.com/9-5-9650/2011/2-engine/engine-management-and-fuel-system-v6/fault-diagnosis-diagnostic-trouble-codes/dtc-p0351-p0356-p2300-p2301-p2303-p2304-p2306-p2307-p2309-p2310-p2312-p2313-p2315-or-p2316-lau
- newtonnet.co.uk/fiesta/fordobd2012.pdf