OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2311

Ignition Coil D Secondary Circuit

P2311 concerns the secondary side of coil D, usually cylinder 4. The secondary winding has thousands of turns of fine wire and delivers roughly 15–40 kV, so insulation that is merely tired can let the spark escape to ground instead of crossing the plug gap. Few control units watch this side as a circuit of its own; FCA's 3.6 Pentastar V6 does, naming P2311 coil 4 secondary circuit with insufficient ionization in bulletin 18-069-16 (2015–2016 Caravan and Town & Country, fixed by a new PCM). Most other makers leave such faults to misfire detection, so P0304 is the more frequent companion. Because misfire can overheat the catalyst, CARB lets misfire be evaluated in blocks of 200 revolutions and demands a flashing MIL at damaging rates.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 11

Possible causes

  • Aged insulation in coil D or its boot letting the spark leak to ground high
  • Spark plug of cylinder 4 worn, gap grown high
  • Oil in the plug well softening the boot medium
  • PCM ion-sense fault (FCA bulletin 18-069-16) low

Symptoms

  • Check engine light on
  • Misfire on cylinder 4, worse in damp weather or under load
  • Flashing MIL at heavy misfire

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2311

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication