OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P230E

Cylinder 5 Air-Fuel Ratio Imbalance - Adjustment At Limit During Balance

P230E concerns cylinder 5 and is genuine only on engines with five or more cylinders, such as inline fives, sixes and V8s. The balancing logic has exhausted the individual fuel trim for cylinder 5. Audi documents a special case: on the 2020 A6 with the four-cylinder 2.0 TFSI (EA888 Gen 3) a calibration error stored a cylinder 2 imbalance as P230E, so on that car the code really points at cylinder 2, while the guided tests still diagnose the right cylinder; the bulletin is informational and offers no fix. A P230E on a four-cylinder is therefore a reason to check the software and the bulletins first. VW's 2014 Golf table already includes the plain cylinder 5 code P21A0 for its five-cylinder; P0305 is the misfire counter for the same cylinder.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 0E

Possible causes

  • Injector of cylinder 5 delivering too much or too little (deposits, wear) high
  • Air leak at the intake port or injector seal of cylinder 5 medium
  • Valve of cylinder 5 not sealing (worn seat or guide), low compression medium
  • Calibration error in the cylinder assignment (Audi 2.0 TFSI Gen 3, bulletin 2060348) medium

Symptoms

  • Check engine light on
  • Rough idle, possibly misfire on cylinder 5
  • Higher fuel consumption or exhaust smell

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P230E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication